GBTW100015 – The Flow M2C-2030 DWT Waterjet Cutting System, featuring a 30HP Hyplex Prime pump, is designed for precision cutting with an operating pressure range of 55–60 ksi (379–414 MPa). Manufactured by Flow, this unit includes a serial number 5448-1 and was used with an enclosure assembly (049886-3) rated at 37A, 460V/60Hz/3PH, with a 5kA S.C. amp rating and Type 4 enclosure. It is currently in used condition and includes a parts list and detailed installation requirements. Ideal for industrial cutting applications requiring high-pressure waterjet technology.

Specifications:

• Machine Type: Waterjet Cutting System
• Pump Model: 30HP Hyplex Prime
• Manufacturer: Flow
• Model Number: M2C-2030 DWT
• Serial Number: 5448-1
• Operating Pressure: 55–60 ksi (379–414 MPa)
• Enclosure Assembly: 049886-3
• Full Load Amps: 37A
• Voltage/Frequency/Phase: 460V / 60Hz / 3PH
• Electrical Diagram: 049973-DWG
• S.C. Amp Rating: 5kA
• Enclosure Type: Type 4
• Condition: Used
• Location: Taiwan

Parts List:

• Crankcase: Direct Drive Bearing Set (Includes bearing housing, coupling, bearing pad ×2, 10-grade bolts): 3 Sets
• Crankcase: Low Pressure Bearing Base (Includes bearing base and two types of oil seals): 3 Sets
• Basic Maintenance Kit (Mid-term Maintenance): 1 KIT
• Second Generation Bearing Housing Assembly: 3 PCs
• Second Generation Seal Seat: 3 PCs
• Check Valve Body: 3 PCs
• High Pressure Zirconia Ceramic Sleeve: 3 PCs

Installation Requirements:

• Floor: Steel-reinforced concrete, ≥15 cm thick, compressive strength ≥210 kg/cm², leveling within 12 mm, smooth with no cracks
• Power: Main: 3-phase 220V/480V, 100A circuit breaker; Control: Single-phase 220V, 10A circuit breaker
• Air: Compressor: 6–7 kg/cm², 60 CFM, 15 HP
• Water: Pressure ≥60 psi (4 kg/cm²), inlet 3/4” (19 mm), flow 12–21 L/min, filtered (RO recommended), PVC piping
• Drainage: Pressure ≥60 psi (4 kg/cm²), outlet 1”, slope 1:20–1:26, 3/4” PVC piping
• Exhaust: Pipe size ≥1/2”, discharge to external exhaust
• Gas: Nitrogen for special processes, clean/dry compressed air for cylinder actuation/vacuum valves

Applications:

• Precision cutting of various materials
• Industrial manufacturing and fabrication
• Automotive and aerospace component processing